JCP Construction Products is the specialist fixings division of the Owlett-Jaton Group. Owlett-Jaton is in turn owned by Hexstone Limited the largest importers of Fasteners and Fixings in the UK. JCP Construction Fixings are designed for…well the construction industry, makes sense. Not only do they have a comprehensive range of products but JCP also have an Anchor Calculation Programme with 3D Graphics. John Murphy(Castlerea) Ltd have a long association with Owlett-Jaton and JCP.
Anchor Calculation Software
The Anchor Calculation Programme is compliant with European Guide EOTA TR 029 for bonded anchors and EOTA ETAG-001 ANNEX C for mechanical anchors. It has 3D graphics and “hole depth optimisation” for chemical anchors. It currently has the facility to calculate up to nine configurations of fixings in different base plate geometry with more combinations planned shortly.
The programme is free to use, all you must do is log onto here and work away. If you have any questions you can ring the lads in the London office @ 0044 2089 431800 they will be very happy to help with your enquiries.
The programme is free to use, all you must do is log onto here and work away. If you have any questions you can ring the lads in the London office @ 0044 2089 431800 they will be very happy to help with your enquiries.
JCP Mortar Estimator
This is another very helpful piece of software, again it is free and all you do is log onto the link above and click on the download button. The Mortar Estimator Tool allows engineers to design connections using a simple design tool to consider loadings, spacing’s and edge distances.
All the relevant information can be loaded into the program. The programme will calculate how many cartridges of chemical anchor you need for the project in question and of course JCP have a full selection of injection resins to select from. All JCP resins are CE Certified.
All the relevant information can be loaded into the program. The programme will calculate how many cartridges of chemical anchor you need for the project in question and of course JCP have a full selection of injection resins to select from. All JCP resins are CE Certified.
Through Bolts for Cracked and Uncracked Concrete
OPTION 1
Along with calculation software and chemical anchors JCP supply Allgrip with Option 7 Through Bolts for uncracked and Option 1 for cracked concrete for use in concrete in over C20/25 concrete strength class.
OPTION 7
These Anchors come in a variety of sizes starting at;
· M6 x 60mm through to M24 x 260mm in the Option 7 series
· M8 x 75mm through to M16 x 200mm in the Option 1 series
With full data sheets available to back up their quality claims. They also provide you the end user with the documentation needed for your end of contract audit trail. JCP also offer CE Certified Through Bolts in Stainless Steel in Grade A4-316.
· M6 x 60mm through to M24 x 260mm in the Option 7 series
· M8 x 75mm through to M16 x 200mm in the Option 1 series
With full data sheets available to back up their quality claims. They also provide you the end user with the documentation needed for your end of contract audit trail. JCP also offer CE Certified Through Bolts in Stainless Steel in Grade A4-316.
Socket Bolt Anchors
I wrote about our new service, on site anchor testing, a few blogs back and it is JCP’s Socket Anchor Bolt that I originally requested to provide this testing service for. Their Socket Anchor Bolt is available in Single and Dual Thread, the dual Thread comes in M8+M10 and then the single Thread is available in M8 and M10 separately, all three options have an Internal Thread.
The shank is self-tapping which cuts its own thread in the base material and it is suitable for use in solid concrete, hollow concrete, bricks, dense blocks and most natural stone. These come with a full set of data sheets and have CE Certification. |
Drop in Anchors
The JCP Range includes the following range of Drop in Anchors:
· Standard zinc plated
· Lipped zinc plated
· ETA Approved with CE Cerfication
· Stainless Steel with CE Certifcation
The ETA Approved Drop in Anchor is a deformation controlled anchor suitable for use in concrete and requires the use of the right setting punch to ensure correct installation. The anchors are covered by a European Technical Approval single use in non-cracked concrete or multiple use for non-structural application in both cracked and non-cracked concrete
All JCP Products are available in a 4/5 working day delivery if not is stock in our two facilities in Ireland or the UK. If you have any questions leave a comment here or contact the number provided below.
· Standard zinc plated
· Lipped zinc plated
· ETA Approved with CE Cerfication
· Stainless Steel with CE Certifcation
The ETA Approved Drop in Anchor is a deformation controlled anchor suitable for use in concrete and requires the use of the right setting punch to ensure correct installation. The anchors are covered by a European Technical Approval single use in non-cracked concrete or multiple use for non-structural application in both cracked and non-cracked concrete
All JCP Products are available in a 4/5 working day delivery if not is stock in our two facilities in Ireland or the UK. If you have any questions leave a comment here or contact the number provided below.
Contacts
Allgrip Industrial Ireland & UK are very proud re-sellers to end users of such a world leader as Heller. We carry stock at both our distribution facilities in Stourbridge, Birmingham and Castlerea, Ireland. This allows us to offer the next day delivery service that works well for our customers. The numbers below are our sales offices should you need to make enquiries or place an order.
1. Allgrip Industrial UK: Birmingham Sales Office 01384 424767
2. Allgrip Industrial Ireland: Castlerea Sales Office 094 9621283
3. John Twohig +353 (0)87 234 2238 or john@allgrip.ie
Download the Allgrip Industrial Catalogue here.
Allgrip Industrial Ireland & UK are very proud re-sellers to end users of such a world leader as Heller. We carry stock at both our distribution facilities in Stourbridge, Birmingham and Castlerea, Ireland. This allows us to offer the next day delivery service that works well for our customers. The numbers below are our sales offices should you need to make enquiries or place an order.
1. Allgrip Industrial UK: Birmingham Sales Office 01384 424767
2. Allgrip Industrial Ireland: Castlerea Sales Office 094 9621283
3. John Twohig +353 (0)87 234 2238 or john@allgrip.ie
Download the Allgrip Industrial Catalogue here.